Approvals
CP 443-5 Extended
Equipment Manual, 01/2023, C79000-G8976-C162-10
47
FM
Factory Mutual Approval Standard Class Number 3600, 3611, 3810
Class I, Division 2, Group A, B, C, D, T4 or Class I, Zone 2, Group IIC, T4
Ta: Refer to the temperature class on the type plate of the CP.
Certificate of Compliance: 3030463
Australia - RCM
The CP meets the requirements of the AS/NZS 2064 standards (Class A).
Notice for Canada
This class A digital device meets the requirements of the Canadian standard ICES-003.
AVIS CANADIEN
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Current approvals
SIMATIC NET products are regularly submitted to the relevant authorities and approval
centers for approvals relating to specific markets and applications.
If you require a list of the current approvals for individual devices, consult your Siemens
contact or check the Internet pages of Siemens Industry Online Support:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/15679/cert)
To Next Page
Loading...
