Siemens SIMATIC NET SCALANCE S615 - Page 18

The following is a list of all available Layer 2 services through which the device can be
accessed.
The table includes the following columns:
• Layer 2 service
The Layer 2 services that the device supports.
• Default status
The default status of the service (open or closed).
• Service con󹪝gurable
Indicates whether the service can be con󹪝gured via WBM / CLI.
Layer 2 service Default status Con󹪝gurable
DCP Open (when con󹪝gured) ✓
LLDP Open (when con󹪝gured) ✓
SIMATIC NET TIME Open (when con󹪝gured) ✓
VLAN Open (when con󹪝gured) ✓
VXLAN
1)
Open (when con󹪝gured) ✓
1)
Only with SCALANCE MUM85x
Security recommendations
SCALANCE S615
18 Operating Instructions, 05/2023, C79000-G8976-C389-08