Siemens SIMATIC S7-1200

Configuring a software controller
3.10 Parameter view
PID control
50 Function Manual, 03/2017, A5E35300227-AC
● Display of all memory values of a parameter: Start value PLC, Start value project, Monitor
value
● Display of the parameter comparison of the memory values of a parameter
Operator control functions:
● Navigation for quickly changing between the parameters and parameter structures.
● Text filter for faster searches for particular parameters.
● Sorting function for customizing the order of parameters and parameter groups to
requirements.
● Memory function for backing up structural settings of the Parameter view.
● Monitoring and modifying of parameter values online.
● Change display format of value.
● Function for saving a snapshot of parameter values of the CPU in order to capture
momentary situations and to respond to them.
● Function for applying a snapshot of parameter values as start values.
● Download of modified start values to the CPU.
● Comparison functions for comparing parameter values with one another.
Validity
The Parameter view described here is available for the following technology objects:
● PID_Compact
● PID_3Step
● PID_Temp
● CONT_C (S7-1500 only)
● CONT_S (S7-1500 only)
● TCONT_CP (S7-1500 only)
● TCONT_S (S7-1500 only)
● TO_Axis_PTO (S7-1200 Motion Control)
● TO_Positioning_Axis (S7-1200 Motion Control)
● TO_CommandTable_PTO (S7-1200 Motion Control)
● TO_CommandTable (S7-1200 Motion Control)