Siemens Simatic S7-1500 - Page 31

Installing
4.3 Prepare base image
CPU 1505SP (F) Ready4Linux Version 2.7
Operating Instructions, 05/2019, A5E46864285-AA
31
Procedure
To create a USB flash drive with a Debian Live system, follow these steps:
1. Insert the USB flash drive into your Windows computer.
2. Open "Rufus".
3. Select the drive with the USB flash drive as "Device".
4. Under "Boot selection", select the installation image of the Debian Live system via the
"SELECT" button.
5. Assign the other properties as specified in the following table.
Property
Setting
Partition scheme MBR
Target system
BIOS or UEFI
Volme label
Enter a designation for the drive.
File system
FAT32 (Default)
Cluster size
4096 bytes (Default)