Siemens Simatic S7-1500 - Page 98

Reference information
A.1 Permitted commands / parameters
CPU 1505SP (F) Ready4Linux Version 2.7
98 Operating Instructions, 05/2019, A5E46864285-AA
Parameters in the Backup and Restore Tool
To be able to use the parameters, start the Diagnostics Tool with "./s7_restore_tool".
Parameter
Description
-i
--image
Path to the base image that is used.
-d --device Target hard disk.
-b
--backup
Create a backup of the selected device.
-f
--factory
Reset factory setting to base image.
-r
--restore
Restore device with the selected image.
-o
--overwrite
Overwrites the existing configuration during the recovery.
-y
--yes
Click "Yes" to confirm prompt.
-v
--verbose
Enables verbose mode.
-h
--help
The help and an example of how to use the tool are displayed.
-V
--version
Displays information about the current version.