Siemens SIMATIC S7-1500T Equipment Manual

Special information
NOTE
Important note for maintaining the operational safety of your plant
Plants with safety-related features are subject to special operational safety requirements on
the part of the operator. The supplier is also obliged to comply with special product
monitoring measures. For this reason, we inform you in personal notifications about product
developments and features that are (or could be) relevant to the operation of plants from a
safety perspective.
By subscribing to the corresponding notifications, you will ensure that you are always up-to-
date and able to make changes to your system when necessary.
Log onto Industry Online Support. Follow the links below, and right-click on "email on
update":
SIMATIC S7-1500/SIMATIC S7-1500F
(https://support.industry.siemens.com/cs/ww/en/ps/13716)
Distributed I/O (https://support.industry.siemens.com/cs/ww/en/ps/14029)
STEP 7 (TIA Portal) (https://support.industry.siemens.com/cs/ww/en/ps/14667)
SINAMICS S120 (https://support.industry.siemens.com/cs/ww/en/ps/13231)
SINAMICS Startdrive (https://support.industry.siemens.com/cs/ww/en/ps/13438)
Operator control and monitoring systems
(https://support.industry.siemens.com/cs/ww/en/ps/14729)
Industrial communication (https://support.industry.siemens.com/cs/ww/en/ps/15247)
Safety systems – Safety Integrated
(https://support.industry.siemens.com/cs/ww/en/ps/19902)
NOTE
When using F-CPUs in safety mode and fail-safe modules, note the description of the fail-safe
system in the Programming and Operating Manual SIMATIC Safety - Configuring and
Programming (https://support.industry.siemens.com/cs/ww/en/view/54110126).
Recycling and disposal
For environmentally friendly recycling and disposal of your old equipment, contact a certified
electronic waste disposal company and dispose of the equipment according to the applicable
regulations in your country.
Industry Mall
The Industry Mall is the catalog and order system of Siemens AG for automation and drive
solutions on the basis of Totally Integrated Automation (TIA) and Totally Integrated Power
(TIP).
You can find catalogs for all automation and drive products on theInternet
(https://mall.industry.siemens.com).
7
Introduction
SIMATIC Drive Controller
Equipment Manual, 11/2022, A5E46600370-AC

Siemens SIMATIC S7-1500T Specifications

General

Brand	Siemens
Model	SIMATIC S7-1500T
Category	Controller
Language	English