Expert Functions
5.6 Measuring Function
Connection of the SINAMICS S120 to the Technology CPU
Product Information, 09/2011, A5E00480378-04
163
Transferring the configuration to the Technology CPU
The Technology CPU configuration has been changed as a result of inserting the
TM17 terminal module and aligning with HW Config.
To transfer the modified configuration to the Technology CPU, follow these steps:
1. Open HW Config.
2. Perform a download.
3. To check the Drive CLiQ connection, switch to the S120_CU320 > Topology
folder in the S7T Config project navigator.
4. Compare the Drive CLiQ connection of the parameter assignment with your configuration
and adjust the topology or configuration as appropriate.
To Next Page
Loading...
