Expert Functions
5.7 Triggering an output cam using the TM17 terminal module
Connection of the SINAMICS S120 to the Technology CPU
Product Information, 09/2011, A5E00480378-04
167
Assigning parameters to the TM17 terminal module
To perform the parameterization of the TM17 terminal module, follow these steps:
1. Switch to the S120_CU320 > Input/output components >TM17 folder in the
S7T Config project navigator.
2. Click "Inputs/outputs".
The "Inputs/outputs" dialog will be displayed.
3. Enter the "Output cam" function in the "Function" column for the DI/O 0 input.
To Next Page
Loading...
