Programming the S7-400
7-4
Automation System S7-400 Configuration and Use
A5E0044271 1-02
7.2 Programming Devices for SIMATIC S7
Introduction
A programming device (PG) is a special industrial-grade personal computer with a
compact design. It is fully equipped for programming SIMATIC automation
systems.
Characteristics of the Programming Devices
A PG or PC with the meeting the following requirements is needed to work
effectively with STEP 7:
PG/PC Properties Recommendation
Operating system and user interface Microsoft Windows 2000, Windows XP
Processor Pentium
• for Windows 2000 P 600
• for Windows XP P 600
Main memo ry at least 256 MB
512 MB recommended
Free disk space 300 to 600 MB, depending on scope of the
installation
Graphics XGA 1024x768,16-bit color depth
Color monitor, keyboard and mouse Windows-compatible
If you have large STEP 7 projects or HW configurations, you should use a
programming device or a PC with processing power that corresponds with what is
currently available on the market.
To Next Page
Loading...
