3 FM-STEPDRIVE specifications 02.05
© Siemens AG 1998 All Rights Reserved
3-6 FM-STEPDRIVE/SIMOSTEP (FB)
3.4 Applicable standards, regulations, laws
The following standards, regulations and laws must be observed
when operating the FM-STEPDRIVE:
• DIN EN 60204 Part 1 (VDE 0113) Electrical equipment of machines
• DIN VDE 0100 Erection of power installations with
nominal voltages up to 1000 V
• DIN VDE 0106 Protection against electric shock
• DIN VDE 0470 (and: IEC 529) IP degrees of protection
• DIN VDE 0875 (EN 55011) Radio interference suppression of
electrical appliances and systems
• DIN EN 954-1 Safety of machines
Safety-related parts of
control systems
General design guidelines
If you intend to use the FM-STEPDRIVE power drive in a residential area,
the limit values of the following standards must also be observed:
• EN 60555 Disturbances in electricity supply
networks caused by household
appliances and similar equipment
• EN 55022, Class B Limit values and measurement
methods for information technology
equipment
• DIN EN 61000 Part 3-2 Electromagnetic compatibility
In case of high interference levels, additional measures must be taken.
We recommend to provide for EMC design of cabinets, e.g. 8MC
cabinets,
(-> catalog NV 21).
The following standards, regulations and laws have been observed
when developing the FM-STEPDRIVE:
• UL 508 Industrial control equipment
• CSA C22.2 No 142 Process control equipment
To Next Page
Loading...
Need help?
General
