Siemens SIMODRIVE 611-D - Page 118

04/96

Siemens AG 2001 All rights reserved 6FC5198–jAB40
1–110
SINUMERIK 840C / SIMODRIVE 611–D (DA)
110003 Data cannot be created OK softkey
COPY / PASTE / OK
Data are not created
Data type can only be created once
Select a different data object type
110004 No data selected OK softkey
In the SERVICES area with data selection
–
The data selector is positioned on the directory .. or -
Select with the cursor
110005 No read access for this data OK softkey
DATA MANAGEMENT / COPY / COPY / DATA IN-OUT / PRINT / START
Data cannot be processed
No authorization for reading the selected data or printing exists for the set user class
Set a password, enable keyswitch
110006 No write access at this point OK softkey
DATA MANAGEMENT / NEW / OK / COPY / PASTE
Data cannot be created/copied or written
No authorization to write the selected data exists for the set user class
Set a password, enable keyswitch
110007 Data must not be deleted OK softkey
MANAGEMENT / DELETE / OK
Data are not deleted
No authorization to delete the selected data exists for the set user class, i.e. they cannot be deleted at all
Set a password, enable keyswitch
110008 Selected data cannot be edited OK softkey
MANAGEMENT / EDIT
Editor is not started
The selected data cannot be edited (e.g. a directory)
Select alternative data
110009 No interface file OK softkey
–
The interface is not parameterized and can therefore not be used.
See above
Select or create valid interface
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
1 Alarms
1.5.1 Alarm description