Siemens SIMODRIVE 611-D - Page 133

04/96

Siemens AG 2001 All rights reserved 6FC5198–jAB40
1–125
SINUMERIK 840C / SIMODRIVE 611–D (DA)
120010 Error while generating alarm log OK softkey
Log could not be created.
No log is displayed.
The master control creates the logs when demanded by diagnosis
Check the entry for the length of the logs in the configuration file of the master control and alter if necessary.
120011 Error on creating service log OK softkey
Log could not be created.
No log is displayed.
The master control creates the logs when demanded by diagnosis
Check the entry for the length of the logs in the configuration file of the master control and alter if necessary.
120012 ... cannot be created OK softkey
An error has occurred while creating the specified data object.
The object will not be created or only partially.
–
Delete a file, possibly there are too many files in this directory. Check position of keyswitch and capacity of hard
disk.
120013 No write access at this point OK softkey
You have tried to store a file in the SIEMENS branch, or to store NC data in the user branch when keyswitch not in
position 1 or 2.
Data cannot be stored.
Check the position of the keyswitch.
Leave editor using RECALL key.
120014 ... not available OK softkey
The specified file (e.g. PCF17) has not been found in the NCK.
None
Existing PLC error messages can only be saved in the NC.
Select a different program number for PCF file.
120015 Operating system – error ... OK softkey
An error has been caused in an operating system call during data transfer.
System failure
Operating system error [0x4005]
i.e.: no communication to NCK
Inform service
120016 NCK password not set OK softkey
An attempt has been made to transfer NC files to the NCK for which a password is required.
File is not transferred.
None
Set the password on the NCK side.
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
1 Alarms
1.5.1 Alarm description