Siemens SIMODRIVE 611-D Diagnostics Guide

04/96

Siemens AG 2001 All rights reserved 6FC5198–jAB40
1–167
SINUMERIK 840C / SIMODRIVE 611–D (DA)
161016 Trace triggered ...
Start-up application after trigger has occurred within the control for all active trace buffers.
–
The selected triggers have been reached for all active Trace buffers
–
Applies as from SW 4
161017 Trace concluded ...
Start-up application after end of recording within control for all active Trace buffers.
–
The selected traces have all been concluded, i.e. the selected measuring time has expired.
–
Applies as from SW 4
161018 Trace function aborted ...
Start-up application while Trace function in progress
All active trace functions are aborted
The selected traces are aborted before expiry of the measuring time
–
Applies as from SW 4
165001 No drive is assigned to this slot OK softkey
Storing, loading MD from an individual drive
Function is not executed
Defined drive number is not assigned to any slot
Match drive configuration and accept
165002 No data has been transmitted OK softkey
Loading MD files
Function not executed
The selected file does not contain the required MD
Select another file
165003 There is no free memory left OK softkey
–
–
This message appears as a result of the previous operation and is self-explanatory
–
165004 The DPRAM is assigned – data was not transferred OK softkey
Saving, loading MD files
Function is not executed
The link PC to NC is busy.
Wait, startup end, NCK reset or Power On
Scan
Effect
Explanation
Remedy
Note
Scan
Effect
Explanation
Remedy
Note
Scan
Effect
Explanation
Remedy
Note
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
1 Alarms
1.5.1 Alarm description

Siemens SIMODRIVE 611-D Specifications

General

Brand	Siemens
Model	SIMODRIVE 611-D
Category	Control Unit
Language	English