Siemens SIMODRIVE 611-D Diagnostics Guide

04/96

Siemens AG 2001 All rights reserved 6FC5198–jAB40
1–168
SINUMERIK 840C / SIMODRIVE 611–D (DA)
165005 Error in data transfer OK softkey
Loading drive standard data
Some data in the drive are invalid
Data not completely transferred
Repeat operation
165007 Data is stored with errors OK softkey
Saving machine data
An invalid file was stored
Data was not completely transferred
Delete file, repeat operation
165008 Selected drive has no FDD module OK softkey
Drive MD: select motor
Function is not executed
No active FDD drive available
Enter FDD in drive configuration and accept
165009 No valid slot selected OK softkey
Drive configuration: select module or delete slot
Function is not executed
No valid slot number was entered
Enter valid number (1–15), repeat operation
165010 Drive not active OK softkey
Saving or loading MD of an individual drive
Function is not executed
There is no connection to the passive drives
Switch drive to active, accept configuration
165011 Transmission error – data not transferred OK softkey
Saving, loading machine data
Function is not executed
Transmission not possible or transmission interference
Repeat operation
165012 There is no file with FDD motors OK softkey
Drive MD/FDD/motor selection
No default possible for motor
There is no system file
Please notify Siemens Service
Applies as from SW 4
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Note
1 Alarms
1.5.1 Alarm description

Siemens SIMODRIVE 611-D Specifications

General

Brand	Siemens
Model	SIMODRIVE 611-D
Category	Control Unit
Language	English