Siemens SIMODRIVE 611-D Diagnostics Guide

04/96

Siemens AG 2001 All rights reserved 6FC5198–jAB40
1–169
SINUMERIK 840C / SIMODRIVE 611–D (DA)
165013 There is no file with spindle drive motors OK softkey
Drive MD/MSD/motor selection
No default possible for motor
There is no system file
Please notify Siemens Service
Applies as from SW 4
165014 Selected drive has no spindle drive module OK softkey
Drive MD: select motor
Function is not executed
No active MSD drive available
Enter MSD in drive configuration and transfer.
165015 Data transmission has been aborted OK softkey
–
–
This message always appears when the “Abort” softkey has been pressed during a file function and has also been
effective. The file function has therefore been performed incompletely. Because an incomplete file function can
lead to inconsistent data, an aborted loading operation, for example, should be repeated or the result of an incom-
plete save operation, for example, should not be used.
If the operation could no longer be interrupted at the time of operating the Abort key, e.g. because it has already
been completed to the maximum possible extent, then this message does not appear.
Repeat operation if necessary.
165016 No file name entered OK softkey
Save, load, delete, copy MD file functions
Function is not executed
Call up function again, enter correct name
–
165017 No valid file name entered OK softkey
Save, load, delete, copy MD file functions
Function is not executed
Name entered using illegal characters
Call function again, enter correct name
165018 File must not be deleted OK softkey
Deleting MD files
Function is not executed
<online> and STANDARD data cannot be deleted
–
165019 File cannot be edited OK softkey
Selecting Edit or Edit new
Function is not executed
BOOT files cannot be edited.
–
Scan
Effect
Explanation
Remedy
Note
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
1 Alarms
1.5.1 Alarm description

Siemens SIMODRIVE 611-D Specifications

General

Brand	Siemens
Model	SIMODRIVE 611-D
Category	Control Unit
Language	English