Siemens SIMODRIVE 611-D Diagnostics Guide

04/96

Siemens AG 2001 All rights reserved 6FC5198–jAB40
1–170
SINUMERIK 840C / SIMODRIVE 611–D (DA)
165020 Error on selecting file OK softkey
Selection of Edit or Edit new
Function is not performed
Internal error on file selection
Please notify Siemens Service
Applies as from SW 4
165021 Drive configuration has not been saved OK softkey
Saving, loading drive MD
Function is not executed
The configuration must first be saved
Press softkey “Accept conf.+NCKPO”, repeat operation
165022 Data has not been written on hard disk OK softkey
Saving machine data
Files incomplete
Hard disk is probably full
Check free memory on hard disk
165023 Drive is not in configuration OK softkey
Saving, loading drive MD
Fucntion is not executed
The configuration must first be accepted (saved)
Change configuration and accept, with repeat operation
165024 Selected file cannot be copied OK softkey
Copying MD files
Function is not executed
BOOT or <online> data was selected
Select standard or user file
165025 Error: file has not been copied OK softkey
Copying MD files
Function is not executed
The named file does not exist
–
165026 Name is reserved for standard data OK softkey
Edit new, saving, inserting MD files
Function is not executed
This name cannot be used for user files
Enter a different name
Scan
Effect
Explanation
Remedy
Note
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
1 Alarms
1.5.1 Alarm description

Siemens SIMODRIVE 611-D Specifications

General

Brand	Siemens
Model	SIMODRIVE 611-D
Category	Control Unit
Language	English