1FT5
08.95
1FT5/2-4
Siemens AG 1997 All Rights reserved 6SN1197–0AA20
SIMODRIVE 611 (PJ)
When ordering a 1FT5 AC servomotor, for options, it is necessary to specify the
Order code ”–Z” and in addition the short designation. For core types, the last
ordering block is appropriately supplemented.
The following motor is required:
AC servomotor
S For connection to a SIMODRIVE 611 converter with a 600 DC link voltage
S Rated speed 3000 RPM
S Stall torque, 33 Nm at ∆T = 100 K
S Type of construction: IM B5 (IM V1, IM V3)
S Connection type: Power connector for motor/brake, signal connector for
the encoder system
S With integrated holding brake
S With mounted ROD 426 pulse encoder (1000 pulses /rev.)
The following should be ordered: Order No.:
1FT5 AC servomotor 1FT5102–0AF71–1–Z
n
rated
= 3000 RPM,
M
0
= 33 Nm at ∆T = 100 K
Special version: Codes
S Integrated holding brake G45
S Mounted ROD 426 pulse encoder H22
When ordering, specify the following: 1FT5102–0AF71–1–Z G45+H22
Order No., core type: 1FT5102–1AF71–1EB0
(the same motor, only prepared for
encoder mounting)
J
Ordering example
1FT5 AC servomotors
2 Order desi
nations
To Next Page
Loading...
Need help?
General