Commissioning
4.5 Drive configuration for SIMODRIVE 611U
Connecting the SIMODRIVE 611U to the Technology CPU
Product Information, 03/2008, A5E00272066-05
63
● You can enter in this window an arbitrary name for the axis:
Figure 4-44 Drive configuration window
● In the Select SIMODRIVE window, the order numbers of the controller module and the
PROFIBUS module are displayed with a gray background, as you are connected online
with the SIMODRIVE 611U. These input values cannot be changed.
In this window, specify the PROFIBUS address. The address must agree with the bus
address specified in the STEP 7 hardware configuration.
Figure 4-45 SIMODRIVE selection
To Next Page
Loading...
