Introduction
1
Note
The following pages contain the Siemens logo and the Siemens legal information.
Please note that since July 1st, 2023 the Siemens Businesses Large Drives Applications
and Low Voltage Motors are part of InnomoticsGmbH, Germany.
All rights to and product information on the following pages have been transferred from
Siemens to Innomotics.
The re-branding of the document will take place in due course.
1.1 Sales legislation
Typical use cases are listed in this product documentation and in the online help to illustrate
possible application areas for our products. These are purely exemplary and do not constitute a
statement relating to the suitability of the respective product for use in specic individual cases.
Unless explicitly agreed as part of a contract, Siemens assumes no liability relating to such
suitability. Suitability for a particular application in specic individual cases must be assessed by
the user on a case-for-case basis, taking into account all technical, legal and other requirements.
Always observe the descriptions of the technical features and the relevant constraints of the
respective product provided in the product documentation.
1.2 About this manual
1.2.1 Content
Description
These operating instructions provide you with information about the geared motors and their
associated components. You will learn about safely and professionally handling the geared
motors – from the initial delivery up to nal disposal:
• Transporting and storing
• Setup and mounting
• Connecting
• Commissioning
• Testing
Motors for mounting onto SIMOGEAR gearboxes
Operating Instructions, 01/2024, A5E53220841A/RS-AA 7
To Next Page