Siemens SIMOTICS S-1FL6 - Control Buttons

Getting Started
A5E36037886-003, 04/2017
65
Control buttons
Button
Description
Functions
Basic buttons
M button
• Exits from the current menu
• Switches between operating modes in the top level
menu
OK button Short-pressing:
• Confirms selection or input
• Enters sub menu
• Acknowledges faults
Long-pressing:
Activates auxiliary functions
• JOG
• Saves parameter set in drive (RAM to ROM)
• Sets parameter set to default
• Transfers data (drive to micro SD card/SD card)
• Transfers data (micro SD card/SD card to drive)
•
Updates firmware
UP button
• Navigates to the next item
• Increases a value
• JOG in CW (clockwise)
DOWN button
• Navigates to the previous item
• Decreases a value
• JOG in CCW (counter-clockwise)
SHIFT button Moves the cursor from digit to digit for single digit editing,
including the digit of positive/negative signs
Button combinations
Press M + OK buttons for
four seconds
Restarts the drive
Press UP + SHIFT buttons
Moves current display to the left page when
is displayed
at the upper right corner, for example .
Press DOWN + SHIFT
buttons
Moves current display to the right page when
is dis-
played at the lower right corner, for example .