Siemens SIMOTICS S-1FL6 - Page 70

Getting Started
70 A5E36037886-003, 04/2017
Step
Operation
Comment
4 Check the direction of motor rotation.
The default direction of rotation is CW (clockwise). You
can change it by setting the parameter p29001 if neces-
sary.
p29001=0: CW
p29001=1: CCW
Setting a parameter without index (example)
Setting a parameter with index (example)
5 Check the Jog speed.
The default Jog speed is 100 rpm. You can change it by
setting the parameter p1058.
6
Save parameters with the BOP menu function "Save".
7
Switch on the line supply.
8
Clear faults and alarms.
Refer to Chapter "Diagnostics (Page 111)".