● Ethernet interface:
IP address = 169.254.11.22
Subnet mask = 255.255.0.0
Router address = do not use a router
● PROFINET interface X11 (C240 PN)
IP address = no valid address
Subnet mask = no valid address
Router: Do not use a router
6.2.7 MPI subnet
An MPI subnet has the same basic configuration as a PROFIBUS subnet. The installation
rules, stated in the chapter Configuring a PROFIBUS subnet (Page 119), therefore apply.
Connecting
6.2 Networking
SIMOTION C
128 Operating Instructions, 11/2016, A5E33441428B
To Next Page
Loading...
