Certificates 12.96
12-2 Siemens AG 6SE7087-6BM70
SIMOVERT MASTER DRIVES Operating Instructions
Drive and Standard Products Group
Confirmation
Erlangen, 01.07.1995
This confirms that
Equipment AC drive converter
•
Type SIMOVERT
MASTER DRIVES
•
Order No.: 6SE70...
·
Service work in operation is only permissible at the electronics box
·
The converter must be switched into a no-voltage condition and isolated from the supply when
replacing any part/component
·
All panels must be closed during operation.
is manufactured in conformance with DIN VDE 0558 Part 2and DIN VDE 0113 Part 6.2.
This equipment fulfills the shock hazard protection requirements according to DIN VDE 0106
Part 100 when the following safety rules are observed:
Thus, this equipment conforms to the appropriate regulations in Germany according to VBG 4 §2
(2) (VBG is a German regulatory body for safety-related issues).
The local operating regulations (e.g. DIN VDE 0105) must be observed when operating
the equipment.
ASI 1 PE D T
Dr. Link
ASI 1
System-Based
Drive Technology
To Next Page
Loading...
