Connecting
3.4 Installing Control Unit
Inverter with CU240B-2 and CU240E-2 Control Units
50 Operating Instructions, 07/2010, FW 4.3.2, A5E02299792B AA
3.4 Installing Control Unit
3.4.1 Snapping the Control Unit onto the Power Module
IP20 Power Modules
,QVHUW&8 5HPRYH&8
Figure 3-10 Insert the Control Unit on the Power Module and then remove
To gain access to the terminal strips, open the top and bottom front doors to the right. The
terminal strips use spring-loaded terminals.
To Next Page
Loading...
