Siemens SINAMICS G120 - Converters

Technical data
6.6 690 V converters
Power Module PM240-2
Hardware Installation Manual, 01/2020, A5E33294624B AL
99
6.6 690 V converters
Motors for 690 V Power Modules
For the 690 V Power Modules, induction motors are permissible in the range from 50
% … 150 % of the converter power without any restrictions.
Note
Motors for converter operation
Only use motors that are suitable for operation with converters with a DC link.
For 690 V
Power Modules, motors with a suitable insulation system for 690 V converter
operation are required
(e.g. PREMIUM).