Appendix
A.2 Directives and standards
Power Module PM240-2
Hardware Installation Manual, 01/2020, A5E33294624B AL
169
Australia and New Zealand (RCM formerly C-Tick)
The converters bearing the certification mark shown here meet the EMC requirements for
Australia and New Zealand.
Specification for semiconductor process equipment voltage drop immunity
The converters comply with the requirements of standard SEMI F47-0706.
Quality systems
Siemens AG employs a quality management system that meets the requirements of ISO
9001 and ISO 14001.
DNV GL
The converters comply with the requirements of DNV GL for classification – ships, offshore
units, and high speed and light crafts.
Certificates for download
● EC Declaration of Conformity:
(https://support.industry.siemens.com/cs/ww/en/view/58275445)
● Certificates for the relevant directives, prototype test certificates, manufacturers
declarations and test certificates for functions relating to functional safety ("Safety
Integrated"):
(http://support.automation.siemens.com/WW/view/en/22339653/134200)
● UL certificates:
(http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.html)
– FSA, FSB, FSC: 200 V UL File E121068, Vol. 2 Sec. 29
– FSA, FSB, FSC: 400 V UL File E121068, Vol. 2 Sec. 27
– FSD, FSE, FSF: 200 V / 400 V / 690 V UL File E192450, Vol. 13 Sec. 4
– FSG: 400 V / 690 V UL File E192450, Vol. 13 Sec. 4
● DNV GL certificate:
(https://support.industry.siemens.com/cs/ww/en/view/109776500)
Standards that are not relevant
China Compulsory Certification
The converters do not fall in the area of validity of the China Compulsory Certification (CCC).
To Next Page
Loading...
