Integration of a SINAMICS G120X frequency converter in PCS 7
Entry ID: 109793986, V1.0, 09/2021
3.2 CFC engineering
1. Switch to the SIMATIC Manager.
2. In the menu bar, go to "File > Open...".
3. Switch to the "Libraries" tab and then select the library
"PCS 7 AP Library V90".
Figure 3-3
4. Confirm with "OK".
5. In the PCS 7 Library V90, select the "Templates" folder. Select the "Drive"
template, open the associated context menu, then click "Copy".
Figure 3-4
6. Switch to your master data library and go to "Plans"; then insert the copied
template by right-clicking and selecting "Paste".
The copied template is now available in your project.
7. Copy the template from your master data library into your technology hierarchy
and assign a plant identifier for the plan.
To Next Page
Loading...
