Integration of a SINAMICS G120X frequency converter in PCS 7
Entry ID: 109793986, V1.0, 09/2021
3.3 Loading OS, runtime
1. Compile the OS.
During the OS compilation, the motor symbol and the corresponding faceplates
are generated automatically.
2. Open the WinCC application.
3. Configure the computer name via "Computers".
4. Configure your layout via "OS project editor".
5. Switch to the Graphics Designer and open
6. Download the OS.
Monitoring and control
The SINAMICS G120X is monitored and controlled via the faceplate of MotSpdCL.
Besides the motor state, the faceplate also displays other measured values:
• Feedback
• Torque
• Power
• Motor current
Figure 3-8
To Next Page
Loading...
