Integration of a SINAMICS G120X frequency converter in PCS 7
Entry ID: 109793986, V1.0, 09/2021
2.4 Configuring the telegram
Procedure
1. Select standard telegram 20, relevant for communication, and drag & drop it
into the corresponding slot (1.3).
"PROFINET IO > Drives > GSD > SINAMICS G120X PN V1.0 > DRIVE >
Standard telegram 20, PZD-2/6"
Figure 2-4
2. Select the line with the input addresses and open the object properties with the
right mouse button.
3. Switch to the "Addresses" tab and assign the desired input and output
addresses; then assign the process image partition for each.
Figure 2-5
4. Confirm with "OK".
Remember that the channel block that will be used later must be integrated in
the same process image partition (OB3x) as the corresponding hardware.
To Next Page
Loading...
