Integration of a SINAMICS G120X frequency converter in PCS 7
Entry ID: 109793986, V1.0, 09/2021
8. Open the CFC plan.
9. First switch to the sequence editor and drag the blocks into a sequence group
that fits the G120X process image selected in the hardware configuration.
Typically, the process image partition and the associated blocks should be
configured in the same cycle. In the example, OB35.
Figure 3-5
3.2.1 MotSpdCL block
1. Change to CFC editor.
2. Open the object properties of the MotSpdCL block with the context menu.
3. Assign a meaningful name and a suitable description for your drive.
4. Change to the "I/Os" tab.
5. In the "Identifier" column, assign texts as per the table below so that they can
appear accordingly in the faceplate of the OS.
Table 3-2
To Next Page
Loading...
