Intelligent Operating Panel 2 (IOP-2)
Operating Instructions, 06/2020, FW V2.6, A5E39549448B AH
11
4.1 Introduction
Compatibility
The Intelligent Operator Panel 2 (IOP-2) has been designed to enhance the interface and
communications capabilities of SINAMICS Inverters.
The IOP-2 connects to the Inverter through an RS232 interface. It has been designed to
automatically recognize the following devices from the SINAMICS range:
• SINAMICS G120 CU230P-2
• SINAMICS G120 CU240B-2
• SINAMICS G120 CU240E-2
• SINAMICS G120 CU250S-2
• SINAMICS G120C
• SINAMICS G120D-2 CU240D-2*
• SINAMICS G120D-2 CU250D-2*
• SINAMICS ET 200pro FC-2*
• SINAMICS G110D*
• SINAMICS G110M*
• SINAMICS G120X
• SINAMICS G120XA
*Denotes Control Units that require the IOP-2 Hand-Held Kit to connect the IOP to the Control
Unit.
Hand-Held Kit order number: 6SL3255-0AA00-4HA1.
Optical cable order number: 3RK1922-2BP00
To Next Page
Loading...
