Overview
4.2 Layout and functions
Intelligent Operating Panel 2 (IOP-2)
12 Operating Instructions, 06/2020, FW V2.6, A5E39549448B AH
For information on firmware and language upgrades, please see Upgrading the IOP-2
firmware (Page 25).
Note
IOP functional support
Drives with SINAMICS firmware 4.7 SP3 or above will support the new commission
processes of "Quick Startup" and "Advanced Startup".
Drives with GP firmware prior to version 3.4 are not fully supported by the IOP-2.
The actual menu structure and functionality of the IOP-2 will be influenced by the
following factors:
– The software version and type of Control Unit to which the IOP-2 is fitted.
– The firmware and software version of the IOP-2.
– The selected functional group filtering of the parameters.
4.2 Layout and functions
Overview
The physical layout of the IOP-2 is shown below:
Figure 4-1 Layout of the IOP-2
To Next Page
Loading...
