Installation
5.2 Initial set-up
Intelligent Operating Panel 2 (IOP-2)
Operating Instructions, 06/2020, FW V2.6, A5E39549448B AH
19
Wait until the factory reset is
finished
Change or confirm settings
Status screen on completion
-2 is delivered with all available languages and the Quick Startup and Advanced
Startup setups. For information on Firmware upgrades, please see
Upgrading the IOP-
(Page 25).
The status screen can be reconfigured to show a number of different views and
types of
values; these can be configured using the "Status Screen Wizard" in the "Extras" menu, see
Extras Menu (Page 65).
Language selection
The IOP-2 on first start-up will display the language screen for the user to select their required
language, should you wish to select you language manually, the following actions should be
performed:
To Next Page
Loading...
