Figure 8-5 Mounting aid
●
The mounting equipment is a mounting aid that is located in front of the built-in unit. The
mounting equipment is attached to the cabinet frame and to the rails of the built-in unit.
● With its telescopic feet, the mounting equipment can be adapted to the installation height
of the built-in units.
● After releasing the mechanical and electrical connections at the built-unit, the built-in unit
can be withdrawn from the cabinet using the cable winch, and placed down in front of the
cabinet. The built-in unit is guided by the rails of the slide-in devices.
Note
Note the manufacturer's instructions and the safety instructions for the installation and the
handling of the mounting equipment.
● Comply with the "five safety rules".
●
Disconnect the cabinet from the power supply. Do not forget the external power supplies.
● Remove the protective cover.
● Allow free access to the components to be replaced.
● Assemble the mounting equipment for the power unit components. Have the mounting
equipment ready for use.
Servicing
8.5 Repairs
Applications for Cabinet Modules, liquid cooled
Operating Instructions, 04/2015, A5E35974555A 121
Siemens Drives & PLCs
To Next Page
Loading...
