Siemens SINAMICS S120 - TM150 Temperature Sensor Module; Terminal Module TM54 F; Safe Brake Adapter SBA 230 V AC

2.6.23 TM150 Temperature Sensor Module
The TM150 Terminal Module is used to acquire and evaluate data from several temperature
sensors. The temperature is sensed in a temperature range from -99 °C up to +250 °C.
Note
You can find a description of the TM150 in the "SINAMICS S120 Cabinet Modules" Manual,
Chapter, "Options / G51 to G54, TM150 temperature sensor module".
2.6.24 Terminal Module TM54F
The
TM54F Terminal Module is a terminal expansion module with safety-related digital inputs
and digital outputs. The TM54F is used to control Safety Integrated functions.
The TM54F provides 4 fail-safe digital outputs and 10 fail-safe digital inputs.
A fail-safe digital output comprises the following inputs and outputs:
● An output that switches to 24 V DC
● An output that switches to ground
● A digital input to check the switched state.
A fail-safe digital input comprises two digital inputs.
Note
You can find a description of the TM54F in the "SINAMICS S120 Cabinet Modules" Manual,
Chapter, "Options / K87, TM54F Terminal Module".
2.6.25 Safe Brake Adapter SBA 230 V AC
The Safe Brake Adapter AC 230 V is used to control safe brake control (SBC). SBC is used
in safety-related applications, e.g. presses and rolling mills.
Note
You
can find a description of the Safe Brake Adapter in the "SINAMICS S120 Cabinet Modules"
Manual, Chapter, "Options / K88, Safe Brake Adapter SBA AC 230 V".
Description
2.6 Description of the optional components
Applications for Cabinet Modules, liquid cooled
36 Operating Instructions, 04/2015, A5E35974555A