① Inner cabinet connector ② Outer cabinet connector
Figure 4-1 Overview of the position of the cabinet connectors
① Cabinet clearance, 3 mm
② Inner cabinet connector, lower; tightening torque 5 Nm
③ Inner cabinet connector, upper; tightening torque 5 Nm
④ Outer cabinet connector; tightening torque 9 Nm
Figure 4-2 Cabinet connectors
Note
Installing the canopy or hood at an early stage
In order to prevent the ingress of foreign bodies into the unit, attach the drip plate or canopy
at an early stage.
Installation
4.5 Connections of transport units
Applications for Cabinet Modules, liquid cooled
70 Operating Instructions, 04/2015, A5E35974555A
To Next Page
Loading...
