Siemens SINAMICS V20 Series User Manual

Commissioning
5.6 Function commissioning
SINAMICS V20 Inverter
60 Operating Instructions, 07/2012, A5E03728167
● Motor brake controls (holding brake, DC brake, compound brake and dynamic brake)
(P1212 ... P1237, see also "
Setting the braking function (Page 69)".)
● DC-link voltage control (P0210, P1240 ... P1257, see also "
Setting the Vdc controller
(Page
81)".)
● I
max
control (P1340 ... P1346, see also "Setting the Imax controller (Page 79)".)
● Continuous boost, acceleration boost and starting boost level control (P1310 ... P1316,
see also "
Setting the voltage boost (Page 64)".)
● Programmable V/f coordinates (P1320 ... P1333)
● Slip compensation (P1334 ... P1338)
● Economy mode (see "
Running the inverter in economy mode (Page 89)".)
● Super torque mode (see "
Starting the motor in super torque mode (Page 83)".)
● Hammer start mode (see "
Starting the motor in hammer start mode (Page 85) ".)
● Blockage clearing mode (see "
Starting the motor in blockage clearing mode (Page 87)")
● Adjustable PWM modulation (P1800 ... P1803)
● USS / MODBUS communication on RS485 (P2010 ... P2037)
● Cavitation protection (P2360 ... P2362, see also "
Running the inverter in cavitation
protection mode (Page
101)".)
● Sleep (hibernation) mode (P2365 ... P2367, see also "
Running the inverter in sleep mode
(Page
96)".)
● Motor staging (P2370 ... P2380, see also "
Running the inverter in motor staging mode
(Page
98)".)
● PID controller (P2200 ... P2355, see also "
Setting the PID controller (Page 67)".)
● Motor blocking, load missing, belt failure detection (P2177 ... r2198, see also "
Setting the
load torque monitoring function (Page
82)".)
● Free function blocks (FFBs) (P2800 ... P2890, see also "
Setting the free function blocks
(FFBs) (Page
91)".)
● Frost protection (P3852, P3853, see also "
Running the inverter in frost protection mode
(Page
94)".)
● Condensation protection (P3854, see also "
Running the inverter in condensation
protection mode (Page
95)".)
● Wobble function (P2940 ... r2955, see also "
Setting the wobble generator (Page 97)".)
● BICO function (r3978)

Siemens SINAMICS V20 Series Specifications

General

Brand	Siemens
Model	SINAMICS V20 Series
Category	DC Drives
Language	English