Siemens SINAMICS V60 - Component Identification

1.3 Identification
EN-6 SINAMICS V60 Controlled Power Module (CPM60.1) Getting Started
The drive will be always delivered with a complete axis package, including one drive unit
CPM60.1, one motor unit 1FL5. and some necessary cables.
Scope of delivery
Encoder cable (shielded)
Motor cable (unshielded)
Brake cable (unshielded)
Drive side
(to encoder interface X7)
Motor side
(to encoder socket)
4 Nm
4 A
6 A
7 A
10 A
10 Nm
6 Nm
7.7 Nm
4 Nm
10 Nm
6 Nm
7.7 Nm
Refer to the rating plate on
the motor housing for
motor-specific electrical data
Getting started
Warranty card
Cable clamps (2 pieces)
Controlled Power
Module CPM60.1
1FL5 motor
With the brake
Without the brake
Datasheet for 1FL5
motor
For each cable, two lengths
are available for your
selection:
- 5 m
- 10 m
Cables individually packaged
Drive side
(to motor interface U, V, W)
Motor side
(to motor socket)
Drive side
(to motor brake interface X3)
Motor side
(to motor brake socket)
Component Illustration
Remark
--
--
--
Components included in the drive unit package
Components included in the motor unit package
Dimension (W x H x D; in mm):
106 x 226 x 200
Dimension (W x H x D; in mm):
123 x 226 x 200
1FL5 motors have two main
types - with key and without
key. Each type involves motors
with brakes and without brakes.
Applicable to both shielded
and non-shielded cables