3.2 Basic parameter configuration regarding SINAMICS V90 PN
Speed Control with SINAMICS V90 and S7-1200 via PROFINET
Entry-ID: 109739222, V1.0, 07/2016
Siemens AG 2016 All rights reserved
3.2.3 Configure PROFINET settings via the TIA Portal
3.2.3.1 Configure SINAMICS V90 PN
The PROFINET settings of SINAMICS V90 PN can be configured in the TIA Portal
as follows:
1. Create a new project and switch to project view.
2. Input the V90 PN GSD file.
Installation of V90 PN GSD file is only necessary for TIA Portal prior
to V13 (including V13).
3. Find the GSD file and select it. Press the “Install” button to install it.
4. Click the node “Devices & networks” from the device tree on the left side.
To Next Page
Loading...
