Siemens SINAMICS V90 PROFINET - 5 Operation of the Application; Scenario a

5 Operation of the application
5.1 Scenario A
Speed Control with SINAMICS V90 and S7-1200 via PROFINET
Entry-ID: 109739222, V1.0, 07/2016
18
 Siemens AG 2016 All rights reserved
5 Operation of the application
5.1 Scenario A
In scenario A, we use Move instruction for programming and run the motor with
watch table:
Table 5-1
No.
Action
Remarks
1.
Program as follows:
2.
Compile the PLC program and download the program and its
configurations into S7-1200 CPU.
3.
Switch to online mode and enable monitor function: