Siemens SINAMICS V90 PROFINET - Startup (PROFINET Communication)

4 Installation and Startup
4.3 Startup (PROFINET communication)
Speed Control with SINAMICS V90 and S7-1200 via PROFINET
Entry-ID: 109739222, V1.0, 07/2016
17
 Siemens AG 2016 All rights reserved
4.3 Startup (PROFINET communication)
Table 4-2
No.
Action
Remarks
1.
Set drive parameter p922 to be 1.
Select standard telegram 1
2.
Make device & network configurations in the
TIA Portal:
 Device name
 IP address
 Telegram
As shown in section 3.2.3
3.
Go online to test the PROFINET
communication.
4.
Download configurations into controller and
device if the communication works.