Siemens SINUMERIK 840D sl Installation Manual

Installing SINUMERIK Integrate
7
7.1 SINUMERIK Integrate with SINUMERIK Operate
7.1.1 Activating SINUMERIK Integrate products
Procedure
1. Start the SINUMERIK Operate operating software on the control.
2. Press the "Setup" and "Mach. data" softkeys.
3. Press the menu forward key and the "Display MD" softkey.
4. Set the machine data
MD9108 $MM_SINUMERIK_INTEGRATE to "1".
5. The "SINUMERIK Integrate" softkey is displayed on the extended horizontal softkey bar.
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
Installation Manual, 12/2019, A5E44672080B AE 139

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based