Siemens SINUMERIK 840D sl Installation Manual

7. Press the "OK" softkey to remove the version.
The procedure is displayed on a progress indicator.
8. Restart the "SINUMERIK Operate" operating software.
9.2.2 Uninstalling with HMI-Advanced
Before you start to install a new client in Manage MyMachines / Tool with SINUMERIK Operate
on the SINUMERIK controller, you must uninstall previous versions.
Note
SINUMERIK controller remains connected to the server
SINUMERIK controller remains connected to the server when you uninstall the client.
Prerequisite
If you are working on your SINUMERIK controller with the NT operating system, also install
"Windows Installer 2.0".
Open the following directory: "SI5\Clients\Application_Clients\MMR\HMI Advanced
\instmsiw.exe".
The "MMR /Tools HMI Advanced Client" requires the "Sinumerik Integrate Client for HMI
Advanced". You will find the "ePS_Client_AT.exe" installation file under:
"SI5\Clients\SinIntClient\HMI Advanced".
Additional information is provided in chapter: SINUMERIK Integrate with HMI-Advanced
(Page 152).
Manage applications on machines
9.2 Uninstalling the Manage MyResources client
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
Installation Manual, 12/2019, A5E44672080B AE 181

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based