Siemens SINUMERIK 840D sl Installation Manual

● The following preconditions are satisfied:
– Microsoft OLE DB Driver for SQL Server x64
– Microsoft Visual C++ 2015 Redistributable Update 3 (or later)
– .NET Core Runtime & Hosting Bundle for Windows
Additional information is provided in the following chapter: Further installations
(Page 66)
– .NET Framework 4.7 or higher for MMR /Tools
● Start file "dotnet". Under "Info", check that you are using the current version.
● HTTPS communication
– SSL certification is required for the settings.
– After installation, read the following chapter: Setting up an encrypted connection
(Page 111)
● The difference between the operating system time of the SINUMERIK Integrate web server
and the license server must not be more than 1 hour. Use the domain synchronization for
the web servers to avoid potential problems.
Introduction
2.1 Checklist SINUMERIK Integrate 5.x
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
14 Installation Manual, 12/2019, A5E44672080B AE

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based