Siemens SINUMERIK 840D sl Installation Manual

18.The "Detected Internet Connection Settings" window opens and shows the actual settings.
Click "< Back" to correct the settings.
Click "Next >" to continue.
19.The settings are subject to an additional check, and an appropriate message is displayed in
the "Detected Internet Security Settings" window.
Click "< Back" to change the settings in the Internet Explorer.
- OR -
Activate the checkbox "Fix internet security settings" to permit the displayed settings.
Click "Next >" to continue.
Installing SINUMERIK Integrate
7.2 SINUMERIK Integrate with HMI-Advanced
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
162 Installation Manual, 12/2019, A5E44672080B AE

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based