SINUMERIK
®
documentation
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the “Remarks” column.
Status code in the “Remarks” column:
A New documentation.. . . . .
B Unrevised reprint with new Order No.. . . . .
C Revised edition with new status. . . . . .
Edition Order No. Remarks
06.94 6FC5297-0AC10-0BP0 A
08.94 6FC5297-0AC10-0BP1 C
02.95 6FC5297-2AC10-0BP0 C
04.95 6FC5297-2AC10-0BP1 C
09.95 6FC5297-3AA01-0BP0 Description of differences
03.96 6FC5297-3AC10-0BP0 C
08.97 6FC5297-4AC10-0BP0 C
12.97 6FC5297-4AC10-0BP1 C
12.98 6FC5297-5AC10-0BP0 C
08.99 6FC5297-5AC10-0BP1 C
04.00 6FC5297-5AC10-0BP2 C
10.00 6FC5297-6AC10-0BP0 C
09.01 6FC5297-6AC10-0BP1 C
11.02 6FC5297-6AC10-0BP2 C
11.03 6FC5297-6AC10-0BP3 C
12.04 6FC5297-7AC10-0BP0 C
03.06 6FC5297-7AC10-0BP1 C
Trademarks
All product names mentioned may be trademarks or product designations of Siemens AG or their suppliers,
whose use by third parties for their own purposes may infringe the rights of the trademark owners.
Further information is available in the Internet under:
http://www.siemens.com/motioncontrol
This publication was produced with Interleaf V 7.
Copyright
©
Siemens AG, 2006.
Other functions not described in this documentation might be
executable in the control. However, no claim can be made regarding
the availability of these functions when the equipment is first supplied
or in the event of servicing.
We have checked that the contents of this document correspond to
the hardware and software described. Nevertheless, differences
might exist and therefore we cannot guarantee that they are
completely identical. However, the information contained in this
document is reviewed regularly and any necessary changes included
in subsequent editions. We welcome suggestions for improvement.
Subject to change without prior notice.
Siemens AG
Order No. 6FC5297-7AC10-0BP1
Printed in German
To Next Page
Loading...
Need help?
General
