Label on the Device
A label is sticked on the device to indicate the ATEX classification. The following table shows the detailed
information.
European conformity mark with the identification number
of the notified body
PTB 19 Year of certificate
ATEX 3001 Certification number
Explosion-proof protection mark
II For non-mine industry
(2) 2 means the device is in category 2.
The parentheses indicate that the device must be installed
outside the potentially explosive atmosphere.
D The device can be used in the explosive atmosphere caused
by dusts.
G The device can be used in the explosive atmosphere caused
by gases, vapors, or fog.
A.2
Appendix
A.2 Label on the Device
SIPROTEC 5, Additional Information on the Protection of Explosion-Proof Motors with Type of Protection Increased Safety e,
Manual
41
C53000-H5050-C078-1, Edition 03.2019
To Next Page
Loading...
Need help?
General
