Configuring
6.3 Configuring the 3RW5 Soft Starter
SIRIUS 3RW5 Modbus communication module
Equipment Manual, 03/2020, A5E43676481002A/RS-AC/003
87
6.3.3 Access monitoring time
You will find a description of the associated connection monitoring function in chapter
Connection monitoring (Page 27).
Setting options
● 3RW5 HMI High Feature
Menu: "Parameter > Communication module > Modbus TCP / Modbus RTU >
Access monitoring time"
You will find more information on operating the 3RW5 HMI High Feature in the Equipment
Manual of the 3RW5 soft starter.
● SIRIUS Soft Starter ES (TIA Portal) via local interface on the 3RW5 HMI High Feature
– Short overview of Modbus TCP: Window "Project Navigation" with current project
under created Soft Starter > "Parameters" > Window "Work area" >
"Communication module > Access monitoring time"
– Short overview Modbus RTU: Window "Project Navigation" with current project under
created Soft Starter > "Parameters" > Window "Work area" >
"Communication module > Module parameters > Access monitoring time"
Further information on the operation of SIRIUS Soft Starter ES (TIA Portal) can be found
in the online help of SIRIUS Soft Starter ES (TIA Portal).
● User program via the "Modbus TCP communication parameters (Page 176)" or
"Modbus RTU communication parameters (Page 177)" data table
Parameters
Access monitoring time You will find a description of the parameter in connection
with the associated connection monitoring function in
chapter Connection monitoring (Page 27).
• 5 seconds (factory setting)
• 10 seconds
To Next Page
Loading...
