Configuration
3.8.3 Alarm In Event Action (Notify) Setup Screen
The DVR can be set to contact a computer running RAS (Remote Administration
System) or send an e-mail (LAN connections) when certain events occur. See the
Figure 61 – Callback Center (LAN) Setup screen or Figure 62 – Callback Center
(Modem) Setup screen.
Fig. 50 Alarm In Event Action (Notify) setup screen.
z Highlight the Sched box and press the button. A schedule screen appears.
Set the schedule as described earlier.
z Highlight the Notify box and press the button. This toggles between On and
Off. When it is On, the DVR notifies the remote site when certain alarm inputs
are activated based on a defined schedule.
3.8.4 Motion Detector Event Action (Record) Setup Screen
The DVR can be set to react to motion detector differently. Each camera can be
assigned a schedule, associated camera, recording speed, video quality and dwell
time.
Fig. 51 Motion Detector Event Action (Record) setup screen.
49
Siemens Building Technologies SISTORE AX9 AX16_EN.doc
Fire & Security Products 09.2004
To Next Page
Loading...
Need help?
General
