Siemens SITOP PSU100L 6EP1332-1LB00 - Page 35

Technical data
6.2 Output
SITOP PSU100L
Manual, 08.2016, C98130-A7603-A1-2-7629
35
6EP1332-1LB00
(24 V/2.5 A)
6EP1333-1LB00
(24 V/5 A)
6EP1334-1LB00
(24 V/10 A)
6EP1336-1LB00
(24 V/20 A)
Starting delay, max.
1.5 s
1.5 s
1.5 s
1.5 s
Start delay, typ.
150 ms
150 ms
1.5 s
1 s
Voltage rise
120 V/230 V AC max.
500 ms 500 ms 500 ms 500 ms
Voltage rise, typ.
150 ms
130 ms
170 ms
150 ms
Rated current I
out rated
2.5 A
5 A
10 A
20 A
Current range
• Remark
0 - 2.5 A
2.5 A to 45 °C
1.75 A to 60 °C
0 - 5 A
5 A to 45 °C
3.5 A to 60 °C
0 - 10 A
10 A to 45 °C
7 A to 60 °C
0 - 20 A
20 A to 45 °C
12.5 A to 70 °C
Output active power/typical
60 W
120 W
240 W
480 W
Can be connected in paral-
lel to increase the power
rating
Yes
Number of devices that can
be connected in parallel to
increase the power rating,
units
2
Output characteristic See Figure 6-3 Out-
put characteristic
6EP1332-1LB00
(Page 36)
See Figure 6-4 Out-
put characteristic
6EP1333-1LB00
(Page 36)
See Figure 6-5 Out-
put characteristic
6EP1334-1LB00
(Page 36)
See Figure 6-6
6EP1336-1LB00
output characteristic
(Page 37)
Capacitive load, max. 2 mF/A
Figure 6-2 Startup delay/voltage rise